专业提供英国阻燃测试、法国阻燃测试、德国阻燃测试、欧盟阻燃测试、美国阻燃测试、意大利阻燃测试、船舶阻燃测试、国标阻燃测试、飞机阻燃测试

联系我们

电话:400-603-6575
          025-86583475
邮箱:info@fire-test.com

地址:江苏省南京市建邺区江东中路              118号德盈大厦16F

相关测试

测试标准

首页    权威实验室    美国SwRI实验室测试标准/防火检测测试标准

美国SwRI实验室测试标准/防火检测测试标准

美国SwRI实验室介绍
美国SwRI实验室全球知名的国际第三方实验室,美国SwRI实验室在火灾研究及测试认证方面处于世界领先地位,符合建筑规范、IMO海事规范和政府规范。Southwest ResearchI Institute实验室简称:SwRI。Southwest Research Institute(SwRI) is a worldwide leader in fire research and testing for compliance with building codes, maritime codes and government specifications. 咨询电话:025-8658 3475。


南京睿督公司携手美国SwRI实验室提供如下美标防火耐火检测报告,测试标准如下:
10 CFR 50    Fire Tests of Penetration Seals, Protective Envelope and Flexible Barriers 
10 CFR 71    Package and Transportation of Radioactive Material 
16 CFR, Part 1633    Standard for the Flammability (Open Flame) of Mattress Sets 
16 CFR, Section 1500.45    Determining Extremely Flammable Contents of Self-Pressurized Containers (Similar to ASTM D 3065) 
ABD 0031    Fire-Smoke-Toxicity (FST) Test Specification (Airbus Industries) 


AC11 Sect. 5.3.5 and Sect. 5.4.5    Comparative Bond Test 
AC11 Sect. 5.4    Freeze/Thaw Test 
AC24    Sections 6.7, 6.9, 6.10, 6.11 Exterior Insulation and Finish System
AC59    Direct-applies Exterior Finish System 
AITM 2.0007    Determination of the Specific Optical Smoke Density of Aircraft Interior materials 


AITM 3.0005    Determination of Specific Gas Components of Smoke Generated by Aircraft Interior Materials 
ANI/MAERP    Fire Tests of Protective Envelope Systems 
API 16D    Specification for control systems for drilling well control equipment and control systems for diverter equipment 
API 607    Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats 
API 6F    Specifications for Fire Test for valves


ASTM C1166    Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories 
ASTM D1929    Ignition Properties of Plastics 
ASTM D2015    Gross Calorific value of Coal and Coke by the Adiabatic Bomb Calorimeter 
ASTM D2540    Drop-Weight Sensitivity of Liquid Monopropellants  
ASTM D2859    Flammability of Finished Textile Floor Covering Materials 


ASTM D2863    Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)  
ASTM D3014    Flame Height, Time of Burning, Mass Loss of Rigid Thermoset Cellular Plastics in a Vertical Position 
ASTM D3065    Determining Extremely Flammable and Flammable Contents of Self-Pressurized Containers (Similar to 16 CFR, Section 1500.45) 
ASTM D3675    ASTM Test for Surface Flammability of Materials Using a Radiant Energy Source 
ASTM D5485    Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter 


ASTM D568    Flammability of Flexible Plastics 
ASTM D635    Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position 
ASTM E108    Fire Tests of Roof Coverings 
ASTM E119    Fire Tests of Building Construction and Materials 
ASTM E1232    Temperature Limit of Flammability of Chemicals 

ASTM E1317    Flammability of Marine Surface Finishes 
ASTM E1321    Determining Material Ignition and Flame Spread Properties
ASTM E1352    Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies  
ASTM E1353    Cigarette Ignition Resistance of Components of Upholstered Furniture  
ASTM E1354    Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Cone Calorimeter) 


ASTM E136    Behavior of Materials in a Vertical Tube Furnace at 750°C (1382°F) 
ASTM E1529    Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies 
ASTM E1537    Fire Testing of Upholstered Furniture  
ASTM E1590    Fire Testing of Mattresses  
ASTM E162    Surface Flammability of Materials Using a Radiant Heat Energy Source 


ASTM E1725    Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components  
ASTM E1740    Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter  
ASTM E1966    Fire-Resistive Joint Systems  
ASTM E1995    Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally 
ASTM E2010    Positive Pressure Fire Tests of Window Assemblies  


ASTM E2074    Fire Tests of Door Assemblies 
ASTM E2079    Limiting Oxygen (Oxidant) Concentration in Gases and Vapors 
ASTM E2307    Perimeter Joint Test 
ASTM E487    Constant-Temperature Stability of Chemical Materials
ASTM E648    Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source [NIST (NBS) Flooring Radiant Panel] 


ASTM E659    Standard Test Method for Autoignition Temperature of Liquid Chemicals 
ASTM E662    Specific Optical Density of Smoke Generated by Solid Materials (Smoke Chamber) 
ASTM E680    Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM E681    Concentration Limits of Flammability of Chemicals  
ASTM E695-97    Method for Measuring Relative Resistance of Wall, Floor, and Roof Constructions to Impact Loading 


ASTM E771    Spontaneous Heating Tendency of Materials  
ASTM E800    Gas Sampling Protocol 
ASTM E814    Fire Tests of Through Penetrations (Seals) 
ASTM E84    Surface Burning Characteristics of Building Materials 
ASTM E918    Standard Practice for Determining Limits of Flammability at Elevated Temperature and Pressure


ASTM E970    Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source (Utilizes E 648 test apparatus-modified) 
ASTM F1173    Fire and Hydrostatic Tests of Composite Pipe. Similar to IMO A.753(18) 
ASTM F1387    Specification for Performance of Piping and Tubing Mechanically Attached Fittings 
ASTM F3059    Testing and performance requirements for fiber-reinforced polymer (FRP) gratings used in marine construction and shipbuilding to ensure personnel safety 
ASTM G125    Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants 


ASTM G72    Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment 
ASTM G74    Ignition Sensitivity of Materials to Gaseous Fluid Impact  
Bellcore GR-63-CORE (NEBS)    Network Equipment Building Services 
BOEING BSS 7238    Smoke Test (Boeing) 
BOEING BSS 7239    Toxicity Test (Boeing) 


BOEING BSS 7304    Determination of Surface Flammability of Materials Using a Radiant Energy Source 
BS 476 Part 20, 24    Equivalent or similar to ASTM E119 
CA Technical Bulletin 106    Smoldering Cigarette Test for Mattress 
CA Technical Bulletin 116    Cigarette Test of Upholstered Furniture 
CA Technical Bulletin 117    Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture 


CA Technical Bulletin 121    Flame Retardance of Resilient Filling Materials Used in Upholstered Furniture 
CA Technical Bulletin 129    Flammability Test for Mattresses for use in Public Buildings 
CA Technical Bulletin 133    Flammability Test Procedure for Seating Furniture for Use in Public Occupancies 
CA Technical Bulletin 603    Open-Flame Standard for Mattresses
CA Technical Bulletin 604    Bed Clothing Open-Flame Standard 


CAL-19    California, State of, Title 19, Chapter 8, Articles 1-11 
CAL-19    California, State of, Title 19, Chapter 2, 1237.1 
California Building Code Chapter 7A; CA SFM 12-7A-1    Materials and Construction Methods for Exterior Wildfire Exposure: Exterior Wall Siding and Sheathing 
California Building Code Chapter 7A; CA SFM 12-7A-2    Materials and Construction Methods for Exterior Wildfire Exposure: Exterior Windows 
California Building Code Chapter 7A; CA SFM 12-7A-3    Materials and Construction Methods for Exterior Wildfire Exposure: Horizontal Projection Underside (Soffit) 


California Building Code Chapter 7A; CA SFM 12-7A-4    Materials and Construction Methods for Exterior Wildfire Exposure: Decking 
California Building Code Chapter 7A; CA SFM 12-7A-5    Materials and Construction Methods for Exterior Wildfire Exposure: Ignition Resistant Material 
Can/ULC S102 (Canada)    Canadian Safety Standard 102.2, Equivalent or similar to ASTM E84
CGA C14    Procedures for Fire Testing of DOT Cylinders Pressure Relief Device Systems 
DOC-FF-1-170    Equivalent or similar to ASTM D 2859 


DoD (Various)    Safety and Performance Tests for Qualification of Explosives and Explosives Hazards Classification 
DOT 49 CFR 393.67    Liquid Fuel Tanks 
Drager Tubes    Colorimetric Toxicity 
ECE R100    Annex 8E Battery Electric Vehicle Safety 
ECE R34    Annex 5, “Testing of Fuel Tanks Made of Plastic Material” 


EN 13501-1    Fire Classification of Construction Products Using Reaction to Fire Tests 
EN 13823    Reaction to fire tests for building products, excluding floorings, exposed to the thermal attack by a single burning item (SBI) 
EN ISO 11925-2    Ignitability of building products subjected to direct impingement of flame -- Part 2: Single-flame source test 
EPA T0-15    Determination of Volatile Organic Compounds (VOCs) by GC-MS 
FAR Part 23.853    Vertical Bunsen Burner Test for Passenger and Crew Compartment Interiors  


Fire Block Test of Seats    National Standards for School Buses and School Bus Operations
FM 4880    Flammability Apparatus, Room Corner Test, 25 ft and 50 ft Corner Test 
FM 4910    Clean Room Tests 
FM 4922    Flame/Smoke Exhaust Ducts
FM 4995    Commodity Classification of Idle Plastic Pallets


FM 6930    Flammability Classification of Industrial Fluids
FMCSA 49 CFR 393.67 (Federal Motor Carrier Safety Administration)    Safety Venting Test Pressure Resistance Leakage Test Drop Test Fill Pipe Test
FMVSS 304    Compressed Natural Gas (CNG) Fuel Container Integrity 
FTIR    Toxic Gas Analysis 
FTS 191    Various Test Methods:?
5903: Vertical 12- or 60-second Flame Test for Fabrics
5906: Horizontal 12- or 60-second Flame Test for Fabrics
5908: 45o Angle 12- or 60-second Flame Test for Fabrics


FTS 372    Equivalent or similar to ASTM E648 
IEEE 1202    Flame Testing of Cables for Use in Cable Trays 
IEEE 1717    Testing Circuit Integrity Cables using a Hydrocarbon Pool Fire Test Protocol 
IEEE 1844    Procedure for Determining Circuit Integrity Performance of Fire Resistive Cables in Nuclear Facilities
IEEE 383    Wire/Cable Vertical Flame Test 


IEEE 634    Equivalent or similar to ASTM E814 
IEC 60332-3-2 or EN 50266-2-1    Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
IEC 60332-3-23 or EN 50266-2-3    Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC 60332-3-24 or EN 50266-2-4    Common tests methods for cables under fire conditions - test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4: Procedures - Category C
MO A.653(18)    Surface Flammability of Bulkhead, Ceiling, and Such Finish Materials 


IMO A.753 (18)    Guidelines for the Application of Plastic Pipes on Ships. Similar to ASTM F 1173 
IMO FTP Code Part 1    Non-Combustibility Test 
IMO FTP Code Part 2    Smoke and Toxicity Test 
IMO FTP Code Part 3 (A.754(18))    Recommendation of Fire Resistance Tests for "A," "B," and "F" Class Divisions 
IMO FTP Code Part 5    Test for Surface Flammability 


IMO FTP Code Part 6    Test for Primary Deck 
IMO FTP Code Part 7    Test for Vertically Supported Textiles and Films 
IMO FTP Code Part 8    Test for Upholstered Furniture
IMO FTP Code Part 9    Test for Bedding Components 
IMO Resolution MSC.40(64)    Fire Restricting Materials (ISO 9705)


ISO 1182    Non-Combustibility of Materials 
ISO 14692-2    Petroleum and Natural gas industries Glass-Reinforcer Plastics Piping 
ISO 15029    Determination of spray ignition characteristics of fire-resistant fluids 
ISO 15540    Ships and Marine Technology - Fire Resistance of Hose Assemblies
ISO 15541    Ships and Marine Technology - Fire Resistance of Hose Assemblies


ISO 1716    Heat of Combustion – Determination of the Calorific Value 
ISO 20823    Determination of the flammability characteristics of fluids in contact with hot surfaces -- Manifold ignition test 
ISO 22899-1    Determination of the resistance to jet fires or passive fire protection materials 
ISO 5659 Part 2    Optical Density Test 
ISO 5660    Rate of Heat Release from Building Products (Cone Calorimeter Method) 


ISO 834    Fire Resistance Test 
ISO 9239-1    Determination of Burning Behavior Using a Radiant Heat Source 
ISO 9705    Room/Corner Test 
MIL-STD-810, Method 511    Explosive Atmosphere  
MIL-T-24708(SH)    Quarter-Scale Tests 


NES 711    Determination of Smoke Index of the Products of Combustion from Small Specimens of Materials 
NES 713    Bunsen Burner Flame Test with Draeger Tube Toxicity Determinations 
NFPA 130    Standard for Fixed Guideway Transit and Passenger Rail Systems: This standard specifies fire protection and life safety requirements for underground, surface, and elevated fixed guideway transit and passenger rail systems.
NFPA 251    Equivalent or similar to ASTM E119 
NFPA 252    Equivalent or similar to ASTM E152 
NFPA 253    Equivalent or similar to ASTM E648 


NFPA 255    Equivalent or similar to ASTM E84 
NFPA 256    Equivalent or similar to ASTM E108 
NFPA 258    Equivalent or similar to ASTM E662 
NFPA 259    Potential Heat of Building Materials


NFPA 260    Cigarette Ignition Resistance of Components of Upholstered Furniture 
NFPA 261    Resistance of Mock-Up Upholstered Furniture Material Assemblies to Ignition by Smoldering Cigarettes 
NFPA 265    Equivalent or similar to UBC 8-2 
NFPA 266    Test of Upholstered Furniture Exposed to Flaming Ignition Source
NFPA 267    Test of Mattresses and Bedding Assemblies Exposed to Flaming Ignition Source 


NFPA 268    Radiant Panel Test Exterior Wall Systems 
NFPA 271    Equivalent or similar to ASTM E1354 
NFPA 275    Thermal Barrier Test, Similar to UBC 26-2 
NFPA 285    Method of Test for the Evaluation of Flammability Characteristics of Exterior, Nonload-bearing Wall Assemblies Containing Combustible Components Using the Intermediate-Scale, Multistory Test Apparatus (ISMA) 
NFPA 286    Standard Methods of Fire Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth 


NFPA 290    Jet Fire 
NFPA 30/30A    Flammable and Combustible Liquids Code 
NFPA 37    Standard for the installation and use of stationary combustion engines and gas turbines 
NFPA 415    Airport Terminal Buildings, Fueling Ramp Drainage, and Loading Walkways 
NFPA 417    Fire Tests of Aircraft Loading Walkways 


NFPA 58    Storage and Handling of Liquefied Petroleum Gases. Equivalent or similar to 49 CFR Section 179.105-4 and 179-105-7 
NFPA 701/UL 214 Test 1/Test 2    Fire Tests for Flame-Resistant Textiles and Films: Large Scale and Small Scale 
OTI 95/634    Jet Fire Test 
SAE J1527    Marine Fuel Hose Fire Resistance Tests
SAE J1942    Hose and Hose Assemblies for Marine Applications 


SAE J2464    Electric and Hybrid Electric Rechargeable Energy Storage System (RESS) Safety and Abuse Testing 
SBI - EN 13823    European Single Burning Item Test 
School Bus Seat    School Bus Seat Upholstered Fire Block Test 
SMP 800-C    Bombardier Toxicity Test 
STD791C, Method 6052.1    High Temperature-High Pressure Spray Ignition Test


STD791C, Method 6053.1    Manifold Ignition Test 
SwRI 00-01    Fire Performance Evaluation of Fondue Pot Burners 
SwRI 91-01    Small Scale Fire Test for Paper, Corrugated Board, and Thin Materials 
SwRI 93-01    Fire, Hose Steam, Impact, Ballistic and Leakage Tests 
SwRI 95-03    Testing Requirements for Multi-Hazard Aboveground Flammable Liquid/Fuel Storage Tanks 


SwRI 97-02    Hydraulic Test of Automobile Fuel Tank 
SwRI 99-01    Testing Requirements for Liquid Hydrocarbon Pool-Fire Testing of Aboveground Flammable Liquid/Fuel Storage Tanks (AST) and Liquid Petroleum Gas (LPG) Storage Tanks Containing Fuel 
UBC 17-3    See New Common Code UBC 26-2 
UBC 17-5    See New Common Code UBC 26-3 
UBC 17-6    See New Common Code UBC 26-4


UBC 26-2    Evaluation of Thermal Barriers (Formerly UBC 17-3) 
UBC 26-3    Room Fire Test for Interior of Foam Plastic Systems (formerly UBC 17-5) 
UBC 26-6    Ignition Properties of Plastics
UBC 26-7    Method of Test for Determining Classification of Approved Light-Transmitting Plastics 
UBC 26-9    Method of Test for the Evaluation of Flammability Characteristics of Exterior, Nonload-bearing Wall Assemblies Containing Combustible Components Using the Intermediate-Scale, Multistory Test Apparatus (ISMA) 


UBC 42-1    See New Common Code UBC 8-1 
UBC 42-2    See New Common Code UBC 8-2 
UBC 43-6    See New Common Code UBC 7-5 
UBC 7-2    Fire Tests of Door Assemblies
UBC 7-5    Fire Tests of Through-Penetration Fire Stops (formerly UBC 43-6) 


UBC 8-1    Surface Burning Characteristics of Building Materials. Equivalent or similar to ASTM E84 (Formerly UBC 42-1) 
UBC 8-2    Evaluating Room Fire Growth Contribution of Textile Wallcovering (Formerly UBC 42-2) 
UFC 79-7    Aboveground Storage Tanks 
UL 10A and 10B    Equivalent or similar to ASTM E152 
UL 1479    Equivalent or similar to ASTM E814 


UL 155    Equivalent or similar to ASTM E152
UL 162    Standard for Foam Equipment and Liquid Concentrates
UL 1684    Reinforced Thermosetting Resin Conduit (RTRC) and Fittings 
UL 1685    Vertical Tray or FT4 CL2 
UL 1685    Fire Tests for Data Cables 


UL 1709    Standard for Rapid Rise Fire Tests if Protection Materials for Structural Steel Equivalent or similar to UK-DOE Fire Curve, Mobil Fire Curve, and NPD Fire Curve 
UL 1715    Fire Test of Interior Finish Material 
UL 1975    Fire Test of Foamed Plastics Used for Decorative Purposes 
UL 199    Automatic Sprinklers for Fire-Protection Service 
UL 2024    Standard for Test Method for Flame and Smoke Characteristics of Nonmetallic Raceway Used in Environmental Air-Handling Spaces 


UL 2043    Fire Test for Heat and Visible Smoke Release for Discrete Product and their Accessories Installed in Air-Handling Spaces
UL 2080    Fire Resistant Tanks for Flammable and Combustible Liquids
UL 2085    Fire, Hose Stream, Impact, Ballistic and Leakage Tests. Equivalent or similar to UFC Appendix II-F, 79-7 
UL 2218    Impact Resistance Test of Prepared Roofing 
UL 2335    Fire Tests of Storage Pallets 


UL 555    Fire Dampers and Ceiling Dampers 
UL 711    Standard for Rating and Fire Testing of Fire Extinguishers 
UL 72    Tests for Fire Resistance of Record Protection Equipment
UL 723    Equivalent or similar to ASTM E84 
UL 790    Equivalent or similar to ASTM E108 


UL 9    Equivalent or similar to ASTM E163 
UL 94    Standard Tests for Flammability of Plastic Materials for Parts in Devices and Appliances 
UN Practices & Procedures    Various HazMat Classification Procedures, Test Methods and Criteria, Transport of Dangerous Goods  


南京睿督公司专业从事轨道车辆材料十多年,在防火耐火测试认证领域拥有丰富的经验,具体测试内容,请咨询南京睿督公司 

南京睿督公司免费咨询电话:025-86583475  400-603-6575
网址:www.fire-test.com
邮箱:info@fire-test.com 

测试咨询

验证码